INTRODUCTION                  

                                                                                                                                              XEN-Logo-Mockup-v2

This chapter explains how you can set up LVM-based virtual machines instead of virtual machines that use disk images. Virtual machines that use disk images are very slow and heavy on disk IO.

 

In this example I’m using a CentOS 6.2 host with the LVM volume group /dev/VolGroup00 that has about 465GB of space. /dev/VolGroup00 contains two logical volumes,/dev/VolGroup00/LogVol00 and /dev/VolGroup00/LogVol01 that consume about 104GB of space – the rest is not allocated and can be used to create logical volumes for our virtual machines:

 

 

#vgdisplay
— Volume group —
VG Name                            Vol_www
System ID
Format                                lvm2
Metadata Areas                    1
Metadata Sequence No         5
VG Access                            read/write
VG Status                            resizable
MAX LV                               0
Cur LV                                3
Open LV                             3
Max PV                               0
Cur PV                                1
Act PV                                1
VG Size                              194.82 GiB
PE Size                              4.00 MiB
Total PE                             49875
Alloc PE / Size                    24032 / 93.88 GiB
Free  PE / Size                    25843 / 100.95 GiB
VG UUID               LCdZgy-jVrp-S92Q-RQeI-H87G-jiko-4fmaHF
11

 

 

 

 

 

# lvdisplay
— Logical volume —
LV Name                 /dev/vg_www/lv_root
VG Name                 vg_www
LV UUID                  n5remv-KYEE-O0Ry-g2r6-OrUe-rjyV-x65rHu
LV Write Access        read/write
LV Status                 available
# open                    1
LV Size                    50.00 GiB
Current LE               12800
Segments               1
Allocation                inherit
Read ahead sectors  auto
– currently set to     256
Block device           253:0

— Logical volume —
LV Name                /dev/vg_www/lv_home
VG Name               vg_www
LV UUID                CnvnGP-sDL8-OtBU-OzTT-VjZQ-ZIUo-yzISkX
LV Write Access      read/write
LV Status               available
# open                  1
LV Size                  40.00 GiB
Current LE              10240
Segments               1
Allocation                inherit
Read ahead sectors  auto
– currently set to      256
Block device             253:2

 

12

 

I want to create the virtual machine vm02 now which uses the logical volume /dev/VolGroup00/vm02. I want the virtual machine to have a disk space of 10GB, so I create the logical volume /dev/VolGroup00/vm02 as follows:

 

#lvcreate -L10G -n vm02 vg_www

Afterwards we can run

 

#virt-install –prompt –network bridge=br0 –virt-type=xen

 

again:

Would you like a fully virtualized guest (yes or no)? This will allow you to run unmodified operating systems.
<– no
What is the name of your virtual machine?
<– vm02
How much RAM should be allocated (in megabytes)?
<– 1024
What would you like to use as the disk (file path)?
<– /dev/vg_www/vm02
What is the install URL?
<– http://ftp.tu-chemnitz.de/pub/linux/centos/6.3/os/x86_64

As the disk file path, we specify our new volume group /dev/vg_www/vm02. Please note that virt-install doesn’t ask for the disk space anymore because the disk space is determined by the size of the logical volume (10GB).

1